Mulga Tank Mineralogy Highlights Carbon Capture Potential
Released
Released
Announcement PDF
ASX RELEASE
13 SEPTEMBER 2023
MULGA TANK MINERALOGY HIGHLIGHTS CARBON CAPTURE POTENTIAL
HIGHLIGHTS
• Reconnaissance mineralogical sampling and XRD analysis undertaken on 13 samples from five
diamond holes within the Mulga Tank Ultramafic Complex
• Results show up to 8% brucite and up to 12% Hydrotalcite Group minerals
• Brucite is a key mineral in the passive carbonation of ultramafic mine tailings at the Mt Keith
Nickel Mine which sequesters 40kt of CO2 from the atmosphere each year
• Hydrotalcite Group minerals are also known to passively sequester atmospheric CO2 in ultramafic
mine tailings
• These reconnaissance samples highlight the significant potential for the host rock of the Mulga
Tank disseminated nickel sulphide mineralisation to capture economically significant volumes of
atmospheric CO2 if mined and processed
Western Mines Group Ltd (WMG or Company) (ASX:WMG) is pleased to update shareholders on first pass
mineral characterisation work on diamond drill core samples from the Mulga Tank Ni-Cu-PGE Project, on the
Minigwal Greenstone Belt, in Western Australia’s Eastern Goldfields. The results of this work could positively
benefit the environmental impact of any future mining activities at Mulga Tank.
Powder X-Ray Diffraction (XRD) analysis performed on a series of reconnaissance samples taken from Mulga
Tank drill core resulted in the identification of the mineral brucite (Mg(OH)2) as well as Hydrotalcite Group
minerals. These minerals have been implicated in the passive sequestration of atmospheric CO2 in mine tailings
at several locations worldwide, and in particular, tailings from the giant, dunite-hosted Mt Keith nickel deposit in
Western Australia.
Although only a small group of samples were analysed as part of this first pass study, the results demonstrate
that the mineralogy of Mulga Tank Ultramafic Complex contains critical components which could partially or
entirely mitigate the output of atmospheric CO2 generated in future mining activities. The presence of brucite
and Hydrotalcite Group minerals may result in any tailings generated via a conventional crush, grind and flotation
processing route being amenable to relatively rapid sequestration of atmospheric carbon via carbon
mineralisation processes - thereby significantly enhancing the “green” credentials of the project by producing
NetZero Carbon Nickel, along with the possibility of a carbon credit by-product revenue stream.
Further mineral characterisation work and other studies designed to better understand the potential of the Mulga
Tank Ultramafic Complex will continue in parallel with the ongoing exciting exploration drilling program currently
underway at the project.
Western Mines Group Ltd
Level 3, 33 Ord Street
West Perth WA 6005
ASX:WMG
Telephone: +61 475 116 798
Email: contact@westernmines.com.au
www.westernmines.com.au
Shares on Issue: 60.55m
Share Price: $0.275
Market Cap: $16.65m
Cash: $3.27m (30/06/23)
1
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Commenting on the Mulga Tank Project, WMG Managing Director Caedmon Marriott said:
“Our Technical Director Dr Ben Grguric continues to lead and investigate further studies to enhance
our understanding of the Mulga Tank Complex. This reconnaissance mineralogical work opens an
interesting angle in the significant carbon capture potential of the project, greatly enhancing the
green credentials and also the potential economics of the project. This and other technical studies
will continue in parallel with our ongoing field exploration activities.”
MULGA TANK MINERALOGICAL CHARACTERISATION TESTWORK
Adcumulate dunite ultramafic diamond core drilled by WMG in recent campaigns at Mulga Tank often shows
evidence of expansion and spalling (cracking/break up) in core trays after several weeks exposure to the
atmosphere (Figures 1A-C). This is interpreted to be the result of the reaction of constituent minerals (e.g.
brucite and Hydrotalcite Group minerals) with atmospheric CO2 and the rock undergoing spontaneous natural
carbonation or carbon sequestration. As part of a reconnaissance mineralogical sampling program, to better
understand the mineral composition and confirm the carbon sequestration potential, 13 samples were taken
from the shallower (<310m down hole) portions of five Mulga Tank diamond drill holes completed by WMG.
Figure 1A: Mulga Tank Hole MTD020 Tray 81 423m to 428m 19 July 2022
Fresh core within days of being drilled
ASX:WMG
www.westernmines.com.au
2
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Figure 1B: Mulga Tank Hole MTD020 Tray 81 423m to 428m 7 August 2022
Uncut core beginning to show spalling within 3 weeks of being drilled
Figure 1C: Mulga Tank Hole MTD020 Tray 81 423m to 428m 11 September 2023
Cut core heavily broken up after 14 months exposure to atmosphere
METHODLOGY
Thirteen samples were submitted to two commercial XRD laboratories for semi-quantitative (3 samples at
Microanalysis Australia Pty Ltd, Mount Lawley WA) and quantitative (10 samples at CSIRO Mineral Resources,
Urrbrae SA) XRD analysis. The samples were 5cm lengths of quarter core which were crushed and pulverised
before being analysed using an X-ray powder diffractometer and diffraction pattern analytical software.
ASX:WMG
www.westernmines.com.au
3
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Powder XRD is an analytical technique which allows relative proportions of constituent minerals to be
determined in geological samples utilising the diffraction patterns generated when a collimated X-ray beam is
diffracted by the atomic lattice of the constituent crystalline mineral phases. Depending on the mix of mineral
phases, detection limits are usually around 0.5-1 weight % for each mineral. Results are given in Table 1, below:
SampleID
HoleID
Depth (m)
Serpentinite
Forsterite
Brucite
Hydrotalcite
Magnesite
Quartz
AWB2205
MTD020
156.1
51
bd
2
12
bd
bd
AWB2206
MTD022
120.15
58
25
8
6
bd
bd
AWB2207
MTD022
277.15
45
41
1
3
4
bd
AWB2208
MTD022
156-166
40
56
1
1
bd
1
AWB2209
MTD022
186-196
55
38
0.5-1
1
3
1
AWB2210
MTD023
308.1
51
44
0.5-1
2
0.5-1
0.5-1
AWB2211
MTD025
197.1
42
49
0.5-1
5
2
1
AWB2212
MTD025
218.3
40
55
0.5-1
1
1
0.5-1
AWB2213
MTD026
232.9
59
32
0.5-1
4
bd
0.5-1
AWB2214
MTD026
243.9
60
36
bd
2
bd
0.5-1
AWB2215
MTD026
287.95
43
47
1
4
2
0.5-1
AWB2216
MTD026
298.35
44
47
0.5-1
5
bd
0.5-1
AWB2217
MTD023
186-196
66
28
0.5-1
bd
2
0.5-1
Table 1: XRD Results for Mulga Tank Reconnaissance Mineralogical Characterisation Work
(Notes: All samples consisted of a 5cm piece of quarter core centred on the depth indicated, depths given as 10m ranges
indicate a grab sample from composited drill core within this depth range.
Samples AWB2205-AWB2207 analysed at Microanalysis Australia by semi quantitative XRD, remaining samples by
quantitative Rietveld XRD at CSIRO Mineral Resources.
Hydrotalcite = undifferentiated members of the Hydrotalcite Group of minerals
All results in weight % bd = below detection)
Figure 2: Example of XRD pattern results for sample AWB2213
ASX:WMG
www.westernmines.com.au
4
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
SIGNIFICANCE OF THE RESULTS
The mineralogy of many ultramafic-hosted mineral deposits (particularly dunite-hosted nickel deposits and
diamondiferous kimberlites) are considered to be of critical importance in atmospheric carbon sequestration, as
their high magnesium content offers potential to react with large amounts of carbon dioxide to produce stable
carbonate minerals, effectively sequestering this greenhouse gas.
Forsterite and serpentine minerals (the main gangue minerals in Mulga Tank nickel sulphide-bearing dunite) are
known to react relatively rapidly with CO2 compared to other silicate minerals, however, brucite and several
members of the Hydrotalcite Group of minerals react orders of magnitude faster than forsterite or serpentine
under atmospheric conditions, and can thereby help mitigate the carbon output of a mine in realistic timeframes.
Recently published work by Lu et al. (2022) estimated that an average brucite content of between 1.7 and 5.9
weight percent in mine tailings is required to make a mine carbon neutral if this brucite is allowed to react with
atmospheric CO2. Brucite is a key mineral in the passive carbonation of ultramafic mine tailings at the Mt Keith
Nickel Mine which sequesters 40 kt of CO2 from the atmosphere each year*.
Although only a small group of samples have been analysed at Mulga Tank, as part of a first pass
reconnaissance mineral characterisation program, the results demonstrate that the mineralogy of the dunite
complex contains some critical components which could react to partially or entirely mitigate the output of
atmospheric CO2 generated in future mining and processing activities.
The presence of brucite and Hydrotalcite Group minerals may result in any tailings generated via a conventional
crush, grind and flotation processing route being amenable to relatively rapid sequestration of atmospheric
carbon via carbon mineralisation processes. This would significantly enhance the “green” credentials of the
project, with the potential to produce NetZero Carbon Nickel. Carbon sequestration may also offer the project a
possible secondary carbon credit by-product revenue stream.
Further mineral characterisation work and other studies designed to better understand the potential of the Mulga
Tank Ultramafic Complex will continue in parallel with the ongoing exciting exploration drilling program currently
underway at the project.
References
Lu et al., 2022 - Rate and capacity of cation release from ultramafic mine tailings for carbon capture and storage;
Applied Geochemistry, Vol. 140, 105285
*BHP Unlocking the Potential of Mineral Carbonation - BHP News Articles, 14 September 2020
For further information please contact:
Dr Caedmon Marriott
Managing Director
Tel: +61 475 116 798
Email: contact@westernmines.com.au
This announcement has been authorised for release to the ASX by Dr Caedmon Marriott, Managing Director
ASX:WMG
www.westernmines.com.au
5
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
ABOUT WMG
Western Mines Group Ltd
Western Mines Group Ltd (ASX:WMG) is a mineral exploration company driven by the goal
ACN 640 738 834
Level 3, 33 Ord Street
West Perth
WA 6005
to create significant investment returns for our shareholders through exploration and
discovery of high-value gold and nickel sulphide deposits across a portfolio of highlyprospective projects located on major mineral belts of Western Australia.
Our flagship project and current primary focus is the Mulga Tank Ni-Cu-PGE Project, a
Board
Rex Turkington
Non-Executive Chairman
Dr Caedmon Marriott
Managing Director
major ultramafic complex found on the under-explored Minigwal Greenstone Belt.
Exploration results show significant evidence for an extensive working nickel sulphide
mineral system and is considered highly prospective for Ni-Cu-PGE mineralisation.
The Company’s primary gold project is Jasper Hill, where WMG has strategically
Francesco Cannavo
Non-Executive Director
consolidated a 3km mineralised gold trend with walk-up drill targets. WMG has a diversified
Dr Benjamin Grguric
Technical Director
Leonora in the heart of the WA Goldfields; Youanmi (Au), Pavarotti (Ni-Cu-PGE), Rock of
Capital Structure
Shares: 60.55m
Options: 21.12m
Share Price: $0.275
Market Cap: $16.65m
Cash (30/06/23): $3.27m
Follow us
portfolio of other projects including Melita (Au, Cu-Pb-Zn), midway between Kookynie and
Ages (Au), Broken Hill Bore (Au) and Pinyalling (Au, Cu, Li).
COMPETENT PERSONS STATEMENT
The information in this announcement that relates to Exploration Results and other technical
information complies with the 2012 Edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves (JORC Code) and has been
compiled and assessed under the supervision of Dr Caedmon Marriott, Managing Director
of Western Mines Group Ltd. Caedmon is a Member of the Australian Institute of
@westernmines
Geoscientists, a Member of the Society of Economic Geologists and a Member of the
westernmines
Australasian Institute of Mining and Metallurgy. He has sufficient experience that is relevant
Western Mines Group
to the style of mineralisation and type of deposit under consideration and to the activity
being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
JORC Code. Caedmon consents to the inclusion in this announcement of the matters
based on his information in the form and context in which it appears.
DISCLAIMER
Some of the statements appearing in this announcement may be in the nature of forward looking statements. You should be
aware that such statements are only predictions and are subject to inherent risks and uncertainties. Those risks and
uncertainties include factors and risks specific to the industries in which WMG operates and proposes to operate as well as
general economic conditions, prevailing exchange rates and interest rates and conditions in the financial markets, among
other things. Actual events or results may differ materially from the events or results expressed or implied in any forward
looking statement. No forward looking statement is a guarantee or representation as to future performance or any other
future matters, which will be influenced by a number of factors and subject to various uncertainties and contingencies, many
of which will be outside WMG’s control.
WMG does not undertake any obligation to update publicly or release any revisions to these forward looking statements to
reflect events or circumstances after today's date or to reflect the occurrence of unanticipated events. No representation or
warranty, express or implied, is made as to the fairness, accuracy, completeness or correctness of the information, opinions
or conclusions contained in this announcement. To the maximum extent permitted by law, none of WMG, its Directors,
employees, advisors or agents, nor any other person, accepts any liability for any loss arising from the use of the information
contained in this announcement. You are cautioned not to place undue reliance on any forward looking statement. The
forward looking statements in this announcement reflect views held only as at the date of this announcement.
ASX:WMG
www.westernmines.com.au
6
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
MULGA TANK PROJECT
JORC CODE, 2012 EDITION - TABLE 1
SECTION 1: SAMPLING TECHNIQUES AND DATA
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
ASX:WMG
JORC Code explanation
Commentary
• Nature and quality of sampling (eg cut channels, • Thirteen samples of core were taken from
random chips, or specific specialised industry
different depths from 5 diamond drill holes.
standard measurement tools appropriate to the
The 5cm quarter core samples were crushed
minerals under investigation, such as down hole
and pulverised before being analysed using an
gamma sondes, or handheld XRF instruments, etc).
x-ray powder diffractometer using industry
These examples should not be taken as limiting the
standard techniques.
broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate calibration
of any measurement tools or systems used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
• Drill type (eg core, reverse circulation, open-hole • Diamond drilling comprised NQ2 core
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what
method, etc).
• Method of recording and assessing core and chip • Not applicable to mineralogical work
sample recoveries and results assessed.
• Measures taken to maximise sample recovery and
ensure representative nature of the samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of fine/
coarse material.
www.westernmines.com.au
7
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Criteria
JORC Code explanation
Commentary
• Whether core and chip samples have been • Not applicable to mineralogical work
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
Logging
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
• The total length and percentage of the relevant
intersections logged.
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter, half • Thirteen samples of core were taken from
or all core taken.
different depths from 5 diamond drill holes.
The 5cm quarter core samples were crushed
If
non-core,
whether
riffled,
tube
sampled,
rotary
split,
•
and pulverised before being analysed using an
etc and whether sampled wet or dry.
x-ray powder diffractometer using industry
For
all
sample
types,
the
nature,
quality
and
•
standard techniques.
appropriateness of the sample preparation technique.
• Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field duplicate/
second-half sampling.
• Whether sample sizes are appropriate to the grain
size of the material being sampled.
• The nature, quality and appropriateness of the • Three samples submitted to Microanalysis
assaying and laboratory procedures used and
Australia Pty Ltd for semi-quantitative XRD
whether the technique is considered partial or total.
analysis and 10 samples submitted to CSIRO
Mineral Resources for quantitative Rietveld
For
geophysical
tools,
spectrometers,
handheld
XRF
•
XRD
instruments,
etc,
the
parameters
used
in
determining
Quality of
the analysis including instrument make and model,
assay data
reading times, calibrations factors applied and their
and laboratory
derivation, etc.
tests
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been established.
Verification of
sampling and
assaying
Location of
data points
ASX:WMG
• The verification of significant intersections by either • Not applicable to mineralogical work
independent or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage (physical
and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill • Not applicable to mineralogical work
holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
www.westernmines.com.au
8
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Criteria
Data spacing
and
distribution
JORC Code explanation
Commentary
• Data spacing for reporting of Exploration Results.
• Not applicable to mineralogical work
• Whether the data spacing and distribution is sufficient
to establish the degree of geological and grade
continuity appropriate for the Mineral Resource and
O re R e s e r v e e s t i m a t i o n p ro c e d u re ( s ) a n d
classifications applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves • Not applicable to mineralogical work
unbiased sampling of possible structures and the
extent to which this is known, considering the deposit
Orientation of
type.
data in relation
to geological
• If the relationship between the drilling orientation and
structure
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
Sample
security
Audits or
reviews
• The measures taken to ensure sample security.
• Samples of core were handled by commercial
XRD facilities
• The results of any audits or reviews of sampling • Not applicable to mineralogical work
techniques and data.
SECTION 2: REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and • Te n e m e n t s E 3 9 / 2 1 3 2 , E 3 9 / 2 2 2 3 a n d
ownership including agreements or material issues
tenement application E39/2299
with third parties such as joint ventures, partnerships, • Held 100% by Western Mines Group Ltd
overriding royalties, native title interests, historical
• 1% NSR to original tenement holder
sites, wilderness or national park and environmental
• Native Title Claim by Upurli Upurli Nguratja not
settings.
yet determined
• The security of the tenure held at the time of reporting
No known historical or environmentally
•
along with any known impediments to obtaining a
sensitive areas within the tenement area
licence to operate in the area.
• Tenement is in good standing
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration by • Previous exploration over the Mulga Tank
other parties.
project area by various companies dates back
to the 1980s
• Of these, more detailed exploration was
completed by BHP Minerals Pty Ltd (1982–
1984), MPI Gold Pty Ltd (1995–1999), North
Limited (1999–2000), King Eagle Resources
Pty Ltd (2004–2012), and Impact (2013–2018)
ASX:WMG
www.westernmines.com.au
9
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and style of • The geology of the project area is dominated
mineralisation.
b y t h e i r re g u l a r s h a p e d M u l g a Ta n k
serpentinised metadunite intrusive body
measuring ~5km x 4km, hosted within
metasediments, mafic to felsic schists and
foliated metagranite of the northwest trending
Archean Minigwal Greenstone Belt
• Previous drilling intersected disseminated and
narrow zones of massive nickel-copper
sulphide mineralisation within the dunite
intrusion
• The intrusion is concealed under variable
thicknesses of cover (reported up to 70 m in
places) with the interpretation of the bedrock
geology based largely on aeromagnetic data
and limited drilling
Drill hole
information
• A summary of all information material to the • A listing of the drill hole information material to
understanding of the exploration results including a
the understanding of the exploration results
tabulation of the following information for all Material
was provided in previous ASX announcements
drill holes:
and has not changed
• easting and northing of the drill hole collar
• elevation or RL (Reduced Level – elevation above
sea level in metres) of the drill hole collar
• dip and azimuth of the hole
• down hole length and interception depth hole
length.
If
the
exclusion of this information is justified on the
•
basis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
• In reporting Exploration Results, weighting averaging • Not applicable to mineralogical work
techniques, maximum and/or minimum grade
truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths
of high grade results and longer lengths of low grade
results, the procedure used for such aggregation
should be stated and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly important in the • Not applicable to mineralogical work
reporting of Exploration Results.
• If the geometry of the mineralisation with respect to
the drill hole angle is known, its nature should be
reported.
• If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
Diagrams
• Appropriate maps and sections (with scales) and • Appropriate photos and tabulations are
tabulations of intercepts should be included for any
presented in the body of the announcement
significant discovery being reported. These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
ASX:WMG
www.westernmines.com.au
10
ASX RELEASE | MULGA TANK MINERALOGY CARBON CAPTURE POTENTIAL
Criteria
JORC Code explanation
Commentary
Balanced
reporting
• Where comprehensive reporting of all Exploration • Not applicable to mineralogical work
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration
Results.
Other
substantive
exploration
data
• Other exploration data, if meaningful and material, • Not applicable to mineralogical work
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
Further work
• The nature and scale of planned further work (eg • Not applicable to mineralogical work
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible
extensions, including the main geological
interpretations and future drilling areas, provided this
information is not commercially sensitive.
ASX:WMG
www.westernmines.com.au
11
Share your feedback
Discover