RC Drilling Expansion and Drilling for Equity
Released
Released
Announcement PDF
ASX RELEASE
17 OCTOBER 2023
RC DRILLING EXPANSION AND DRILLING FOR EQUITY
HIGHLIGHTS
• RC drilling program at the Mulga Tank Ni-Cu-PGE Project progressing well with 10 holes
complete and further 12 holes all cased through sand to ~60m
• Expansion of initial program to 22 holes testing the extent of shallow disseminated nickel
sulphide mineralisation across the Mulga Tank Ultramafic Complex
• Drill holes spread over a 2,500m x 1,000m area designed to target shallow mineralisation down to
~300m in the centre of the Complex
• MTRC009 drilled to 522m depth with significant disseminated sulphide mineralisation observed
• Drilling contractor Blue Spec Drilling Pty Ltd supporting the project subscribing for $250,000 of
WMG shares at $0.3289 per share
• Drilling for equity agreement will fund a significant portion of this initial RC program
Western Mines Group Ltd (WMG or Company) (ASX:WMG) is pleased to update shareholders on the progress
of our reverse circulation (RC) drilling program at the Mulga Tank Ni-Cu-PGE Project, on the Minigwal
Greenstone Belt, in Western Australia’s Eastern Goldfields.
The initial 18 hole program has been expanded to 22 holes, totalling approximately 6,600m, and aims to test the
extent of the shallow disseminated nickel sulphide mineralisation observed across the centre of the Mulga Tank
Ultramafic Complex. The holes are spread over a 2,500m x 1,000m area in the centre of the main body of the
Complex, at approximately 500m x 300m spacing, and will attempt to drill to ~300m target depth.
The program is progressing well with the first 10 holes now complete and a further 12 holes cased down to
approximately 60m through the sand cover. After a pause in drilling to set up all the remaining pre-collars the rig
is back into RC drilling, with each hole taking around two days to complete.
The RC drilling technique has been effective through the sand cover with the target 300m depth reached in all
but one of the first ten holes. A number of holes were continued to deeper than 300m where disseminated
mineralisation was observed at end of hole, including MTRC009 which was drilled to a total depth of 522m and
still ended in mineralisation.
The Company has formed an excellent working relationship with our drilling contractor Blue Spec Drilling Pty
Ltd. To support the current RC drilling program Blue Spec have agreed to subscribe for $250,000 of WMG
shares, subject to shareholder approval at the Company’s AGM. This will help fund a significant portion of this
initial RC drilling program.
Western Mines Group Ltd
Level 3, 33 Ord Street
West Perth WA 6005
ASX:WMG
Telephone: +61 475 116 798
Email: contact@westernmines.com.au
www.westernmines.com.au
Shares on Issue: 62.55m
Share Price: $0.315
Market Cap: $19.70m
Cash: $3.27m (30/06/23)
1
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Commenting on the Mulga Tank Project, WMG Managing Director Caedmon Marriott said:
“The RC program at Mulga Tank is progressing well and is fairly rapidly testing the main central
body of the Complex. We’ve expanded the initial 18 hole program, adding some additional holes
on the eastern margin around hole MTD027 - the program now aims to test a ~2,500m x ~1,000m
area. Each hole is taking around 1-2 days to complete so the program may be finished by early
November.
We have a great relationship with Blue Spec Drilling, who have conducted all our drilling at the
project to date. Blue Spec have agreed to support the Company by taking $250,000 worth of
shares, subject to shareholder approval. This is will fund a significant amount of the RC program.”
MULGA TANK DRILLING PROGRAMS
WMG has been undertaking continuous drilling programs at the Mulga Tank Project since November 2022, with
exciting exploration results demonstrating significant nickel sulphide mineralisation and an extensive nickel
sulphide mineral system within the Mulga Tank Ultramafic Complex (ASX, MTD023 Assays Confirm Discovery of
Significant Nickel Sulphide System, 5 April 2023; MTD026 Assays - 840m of Nickel Sulphide Mineralisation, 30
August 2023; MTD027 Expands Mineralisation 4km Across Mulga Tank, 28 August 2023).
A second multipurpose RC drill rig commenced a systematic shallow drilling program across the centre of the
main body of the Complex in September (ASX, RC Drilling Program Commences at Mulga Tank, 20 September
2023) looking to build on these results to date.
RC DRILLING PROGRAM
An expanded 22 hole RC drilling program has been designed to systematically test the lateral continuity of
shallow disseminated nickel sulphide mineralisation observed in the main body of the Mulga Tank Ultramafic
Complex. The holes are spaced at approximately 500m x 300m and look to cover a 2,500m x 1,000m area
across the centre of the Complex. Each hole designed to a target depth of ~300m, for a total of around 6,600m
- of which the top ~60m of each hole, or ~1,300m in total, is mud-rotary drilling through the sand cover.
The planned RC holes are intended to systematically test the central area surrounding diamond holes MTD012MTD022-MTD023-MTD026-MTD027, to confirm if the mineralisation observed is laterally continuous between
the holes and whether richer zones of disseminated mineralisation can be found.
A further advantage to this fairly quick drilling program is that any of the holes can later be re-entered with
diamond drilling continuing from ~300m depth to any deeper targets.
Ten holes have been completed to date and the remaining 12 holes have all been pre-collared through the sand
cover down to ~60m depth. The program has so far proved successful with all but one hole reaching the 300m
target depth, and a number of holes extended beyond this where mineralisation continued.
HOLE MTRC009
Hole MTRC009 was drilled to a total depth of 522m and is understood to be the deepest RC hole Blue Spec
Drilling have ever drilled in Australia. The hole intersected 466m of generally black serpentinised dunite
(56-522m), beneath 56m of sand cover (0-56m) (Appendix - Table 2).
ASX:WMG
www.westernmines.com.au
2
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
The hole was extended beyond the 300m target depth as extensive disseminated magmatic sulphide
mineralisation (trace-2%) was observed nearly continuously down the hole (cumulatively over 390m) starting
from around 117m depth (Appendix - Table 3).
Figure 1A: Examples of Mulga Tank RC drill chips showing disseminated sulphide (161-280m)
Figure 1B: Examples of Mulga Tank RC drill chips showing disseminated sulphide (281-400m)
ASX:WMG
www.westernmines.com.au
3
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Figure 2: Mulga Tank RC drilling program
HoleID
PlannedID
Easting (MGA51)
Northing (MGA51)
Total Depth (m)
MTRC001
MTP028
519403
6688703
444
MTRC002
MTP039
519906
6688994
300
MTRC003
MTP036
520394
6689312
318
MTRC004
MTP045
520868
6689712
222
MTRC005
MTP038
521395
6689305
342
MTRC006
MTP044
521418
6688711
300
MTRC007
MTP030
520408
6688705
300
MTRC008
MTP029
519899
6688703
300
MTRC009
MTP040
520398
6689006
522
MTRC010
MTP031
519402
6689793
312
MTRC011
MTP032
519403
6689301
In progress
Table 1: Collar details for completed Mulga Tank RC holes (MTRC011 in progress)
ASX:WMG
www.westernmines.com.au
4
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
BLUE SPEC DRILLING FOR EQUITY
Blue Spec Drilling Pty Ltd have agreed to subscribe for 760,000 new ordinary shares in Western Mines Group
Ltd for $250,000 at an implied value of $0.3289 per share in order to support the Company’s ongoing RC
drilling program. This issue of shares will be subject to shareholder approval at the Company’s upcoming AGM
in November.
For further information please contact:
Dr Caedmon Marriott
Managing Director
Tel: +61 475 116 798
Email: contact@westernmines.com.au
This announcement has been authorised for release to the ASX by Dr Caedmon Marriott, Managing Director
ASX:WMG
www.westernmines.com.au
5
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
APPENDIX
HoleID
From
(m)
To
(m)
Primary
Lithology
MTRC009
0.0
56
Sand cover
MTRC009
56
66
Oxidised Ultramafic
ox
Oxidised zone with calcrete
MTRC009
66
80
Dunite
ox
Oxidised brown/green dunite, serpentinite veining in bottom contact
MTRC009
80
85
Oxidised Ultramafic
ox
Oxidised zone with calcrete
MTRC009
85
100
Dunite
Weathered dunite
MTRC009
100
104
No chips
Sample too fine to retrieve chips
MTRC009
104
117
Dunite
srp, tc, cb
Dark grey serpentinised dunite, minor talc-carb alteration in places
MTRC009
117
155
Dunite
srp
Black serpentinised dunite with visible disseminated sulphides
MTRC009
155
164
Dunite
srp, tc, cb
Dark grey/green serpentinised dunite with visible disseminated sulphides,
minor talc-carb alteration
MTRC009
164
238
Dunite
srp
Black serpentinised dunite with visible disseminated sulphides
MTRC009
238
245
Dunite
srp, tc, cb
Dark grey/green serpentinised dunite, minor talc-carb alteration
MTRC009
245
249
Dunite
srp
Black serpentinised dunite with visible disseminated sulphides
MTRC009
249
255
Dunite
srp, tc, cb
Dark grey/green serpentinised dunite, minor talc-carb alteration
MTRC009
255
322
Dunite
srp, tc, cb
Dark grey/green serpentinised dunite with visible disseminated sulphides,
minor talc-carb alteration
MTRC009
322
355
Dunite
srp
Black/dark grey serpentinised dunite with visible disseminated sulphides
MTRC009
355
372
Dunite
srp
Variably serpentinised black and green dunite with visible disseminated
sulphides
MTRC009
372
374
Dunite
cb
Carbonate altered dunite
MTRC009
374
425
Dunite
srp
Black serpentinised dunite with visible disseminated sulphides
MTRC009
425
446
Dunite
srp
Dark green antigorised dunite with intermittent visible disseminated sulphides
MTRC009
446
465
Dunite
srp,cb
Dark green antigorised dunite with occasional carbonate altered zones, visible
disseminated sulphides
MTRC009
465
522
Dunite
srp
Black serpentinised dunite with visible disseminated sulphides
Alteration
Comments
Rock-rolled sand overburden
Table 2: Logging table summary for hole MTRC009
HoleID
From
(m)
To
(m)
Interval
(m)
Lithology
Sulphide
Texture
Sulphide
Abundance (%)
Sulphides
Observed
MTRC009
117
145
28
Dunite
Disseminated
tr
Pentlandite
MTRC009
145
164
19
Dunite
Disseminated
tr-1%
Pentlandite
MTRC009
164
176
12
Dunite
Disseminated
3-5%
Pentlandite
MTRC009
176
196
20
Dunite
Disseminated
1-3%
Pentlandite
MTRC009
196
214
18
Dunite
Disseminated
tr-2%
Pentlandite
MTRC009
214
238
24
Dunite
Disseminated
1-3%
Pentlandite
MTRC009
245
249
4
Dunite
Disseminated
tr-1%
Pentlandite
MTRC009
255
287
32
Dunite
Disseminated
tr-1%
Pentlandite
MTRC009
287
322
35
Dunite
Disseminated
tr-2%
Pentlandite
ASX:WMG
www.westernmines.com.au
6
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
HoleID
From
(m)
To
(m)
Interval
(m)
Lithology
Sulphide
Texture
Sulphide
Abundance (%)
Sulphides
Observed
MTRC009
322
372
50
Dunite
Disseminated
tr-3%
Pentlandite
MTRC009
374
384
10
Dunite
Disseminated
1-3%
Pentlandite-Pyrrhotite
MTRC009
384
465
81
Dunite
Disseminated
tr-2%
Pentlandite
MTRC009
465
478
13
Dunite
Disseminated
2-4%
Pentlandite
MTRC009
478
522
44
Dunite
Disseminated
tr-2%
Pentlandite
Table 3: Visual sulphide table for hole MTRC009
HoleID
MTRC009
Easting (MGA51)
Northing (MGA51)
Total Depth (m)
Azimuth
Dip
520398
6689006
522
270
-70
Table 4: Collar details for hole MTRC009
Cautionary statement on visible sulphides
Whilst previous mineralogical work on a limited number of samples from holes MTD020 and
MTD022 has confirmed disseminated pentlandite mineralisation similar mineralogical
investigation has not yet been performed on hole MTRC009. Descriptions of visible sulphides
should never be considered a proxy or substitute for laboratory analysis. Only subsequent
laboratory geochemical assay can be used to determine the widths and grade of mineralisation.
WMG will update shareholders when laboratory results become available.
ASX:WMG
www.westernmines.com.au
7
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
ABOUT WMG
Western Mines Group Ltd
Western Mines Group Ltd (ASX:WMG) is a mineral exploration company driven by the goal
ACN 640 738 834
Level 3, 33 Ord Street
West Perth
WA 6005
to create significant investment returns for our shareholders through exploration and
discovery of high-value gold and nickel sulphide deposits across a portfolio of highlyprospective projects located on major mineral belts of Western Australia.
Our flagship project and current primary focus is the Mulga Tank Ni-Cu-PGE Project, a
Board
Rex Turkington
Non-Executive Chairman
Dr Caedmon Marriott
Managing Director
major ultramafic complex found on the under-explored Minigwal Greenstone Belt.
Exploration results show significant evidence for an extensive working nickel sulphide
mineral system and is considered highly prospective for Ni-Cu-PGE mineralisation.
The Company’s primary gold project is Jasper Hill, where WMG has strategically
Francesco Cannavo
Non-Executive Director
consolidated a 3km mineralised gold trend with walk-up drill targets. WMG has a diversified
Dr Benjamin Grguric
Technical Director
Leonora in the heart of the WA Goldfields; Youanmi (Au), Pavarotti (Ni-Cu-PGE), Rock of
Capital Structure
Shares: 62.55m
Options: 21.12m
Share Price: $0.315
Market Cap: $19.70m
Cash (30/06/23): $3.27m
Follow us
portfolio of other projects including Melita (Au, Cu-Pb-Zn), midway between Kookynie and
Ages (Au), Broken Hill Bore (Au) and Pinyalling (Au, Cu, Li).
COMPETENT PERSONS STATEMENT
The information in this announcement that relates to Exploration Results and other technical
information complies with the 2012 Edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves (JORC Code) and has been
compiled and assessed under the supervision of Dr Caedmon Marriott, Managing Director
of Western Mines Group Ltd. Caedmon is a Member of the Australian Institute of
@westernmines
Geoscientists, a Member of the Society of Economic Geologists and a Member of the
westernmines
Australasian Institute of Mining and Metallurgy. He has sufficient experience that is relevant
Western Mines Group
to the style of mineralisation and type of deposit under consideration and to the activity
being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
JORC Code. Caedmon consents to the inclusion in this announcement of the matters
based on his information in the form and context in which it appears.
DISCLAIMER
Some of the statements appearing in this announcement may be in the nature of forward looking statements. You should be
aware that such statements are only predictions and are subject to inherent risks and uncertainties. Those risks and
uncertainties include factors and risks specific to the industries in which WMG operates and proposes to operate as well as
general economic conditions, prevailing exchange rates and interest rates and conditions in the financial markets, among
other things. Actual events or results may differ materially from the events or results expressed or implied in any forward
looking statement. No forward looking statement is a guarantee or representation as to future performance or any other
future matters, which will be influenced by a number of factors and subject to various uncertainties and contingencies, many
of which will be outside WMG’s control.
WMG does not undertake any obligation to update publicly or release any revisions to these forward looking statements to
reflect events or circumstances after today's date or to reflect the occurrence of unanticipated events. No representation or
warranty, express or implied, is made as to the fairness, accuracy, completeness or correctness of the information, opinions
or conclusions contained in this announcement. To the maximum extent permitted by law, none of WMG, its Directors,
employees, advisors or agents, nor any other person, accepts any liability for any loss arising from the use of the information
contained in this announcement. You are cautioned not to place undue reliance on any forward looking statement. The
forward looking statements in this announcement reflect views held only as at the date of this announcement.
ASX:WMG
www.westernmines.com.au
8
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
MULGA TANK PROJECT
JORC CODE, 2012 EDITION - TABLE 1
SECTION 1: SAMPLING TECHNIQUES AND DATA
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
ASX:WMG
JORC Code explanation
Commentary
• Nature and quality of sampling (eg cut channels, • Reverse circulation (RC) drilling was completed
random chips, or specific specialised industry
using standard industry best practice
standard measurement tools appropriate to the • Individual 1m samples were collected directly
minerals under investigation, such as down hole
from the rig sampling system. Samples will be
gamma sondes, or handheld XRF instruments, etc).
crushed and pulverised to produce a subThese examples should not be taken as limiting the
sample for analysis by either multi-element
broad meaning of sampling.
ICP-AES (ME-ICP61 and ME-ICP41), precious
metals fire assay (Au-AA25 or PGM-ICP23)
• Include reference to measures taken to ensure
sample representivity and the appropriate calibration
and loss on ignition at 1,000°C (ME-GRA05)
of any measurement tools or systems used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
• Drill type (eg core, reverse circulation, open-hole • Reverse circulation percussion drilling rig with
hammer, rotary air blast, auger, Bangka, sonic, etc)
a 5.25inch face sampling bit
and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what
method, etc).
• Method of recording and assessing core and chip • Standard drilling techniques using “best
sample recoveries and results assessed.
practice” to maximise sample recovery
Measures
taken
to
maximise
sample
recovery
and
•
• Information not available to assess relationship
ensure representative nature of the samples.
between sample recovery and grade
Whether
a
relationship
exists
between
sample
•
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of fine/
coarse material.
www.westernmines.com.au
9
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Criteria
JORC Code explanation
Commentary
Logging
• Whether core and chip samples have been • Drill holes geologically logged on a metre basis
geologically and geotechnically logged to a level of • Logging is to a level of detail sufficient to
detail to support appropriate Mineral Resource
support a Mineral Resource estimation,
estimation, mining studies and metallurgical studies.
though further information would be required
Whether
logging
is
qualitative
or
quantitative
in
•
• Logging is qualitative in nature and recorded
nature. Core (or costean, channel, etc) photography.
l i t h o l o g y, m i n e r a l o g y, m i n e r a l i s a t i o n ,
weathering, colour, and other features of the
• The total length and percentage of the relevant
samples. Chip trays were photographed in
intersections logged.
both dry and wet form
• Drillhole was logged in full, apart from rock
rolled pre-collar intervals
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter, half • Laboratory geochemical assay has not yet
or all core taken.
been undertaken
• If non-core, whether riffled, tube sampled, rotary split, • Majority of samples were dry however some
etc and whether sampled wet or dry.
ground water was encountered and some
samples were taken wet
• For all sample types, the nature, quality and
appropriateness of the sample preparation technique. • Industry standard sample preparation
techniques will be undertaken and considered
• Quality control procedures adopted for all subappropriate for the sample type and material
sampling stages to maximise representivity of
sampled
samples.
The
sample size is considered appropriate to
•
• Measures taken to ensure that the sampling is
the grain size of the material being sampled
representative of the in-situ material collected,
including for instance results for field duplicate/
second-half sampling.
• Whether sample sizes are appropriate to the grain
size of the material being sampled.
• The nature, quality and appropriateness of the • Laboratory geochemical assay has not yet
assaying and laboratory procedures used and
been undertaken
whether the technique is considered partial or total.
• Standards, blanks and duplicate samples were
introduced through-out the sample collection
• For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
on a 1:20 ratio to ensure quality control
Quality of
the analysis including instrument make and model, • ALS will also undertake duplicate analysis and
assay data
reading times, calibrations factors applied and their
and laboratory
run internal standards as part of their assay
derivation, etc.
tests
regime
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been established.
Verification of
sampling and
assaying
Location of
data points
ASX:WMG
• The verification of significant intersections by either • Primary logging data was collected using
independent or alternative company personnel.
Ocris logging system on a laptop computer, all
data was compiled into a SQL database
• The use of twinned holes.
server
• Documentation of primary data, data entry
procedures, data verification, data storage (physical
and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill • Drill holes located using a handheld GPS with
holes (collar and down-hole surveys), trenches, mine
accuracy of +/-3m, downhole surveys used
workings and other locations used in Mineral
continuous gyro readings at 5m intervals
Resource estimation.
• Coordinates are in GDA94 UTM Zone 51
• Specification of the grid system used.
• Quality and adequacy of topographic control.
www.westernmines.com.au
10
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Criteria
Data spacing
and
distribution
JORC Code explanation
Commentary
• Data spacing for reporting of Exploration Results.
• The drilling completed was reconnaissance in
nature designed to test specific geological
• Whether the data spacing and distribution is sufficient
targets for first pass exploration purposes only
to establish the degree of geological and grade
continuity appropriate for the Mineral Resource and
O re R e s e r v e e s t i m a t i o n p ro c e d u re ( s ) a n d
classifications applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves • The drilling was planned to be approximately
unbiased sampling of possible structures and the
perpendicular to the interpreted stratigraphy
extent to which this is known, considering the deposit
and mineralisation
Orientation of
type.
data in relation
to geological
• If the relationship between the drilling orientation and
structure
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
Sample
security
Audits or
reviews
• The measures taken to ensure sample security.
• Samples have been delivered to the laboratory
by company personnel
• The results of any audits or reviews of sampling • No audits or reviews of drilling sampling
techniques and data.
techniques or data by external parties at this
stage of exploration
• An internal review of sampling techniques and
data will be completed
SECTION 2: REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and • Tenement E39/2132, tenement applications
ownership including agreements or material issues
E39/2223 and E39/2299
with third parties such as joint ventures, partnerships, • Held 100% by Western Mines Group Ltd
overriding royalties, native title interests, historical
• 1% NSR to original tenement holder
sites, wilderness or national park and environmental
• Native Title Claim by Upurli Upurli Nguratja not
settings.
yet determined
• The security of the tenure held at the time of reporting
No known historical or environmentally
•
along with any known impediments to obtaining a
sensitive areas within the tenement area
licence to operate in the area.
• Tenement is in good standing
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration by • Previous exploration over the Mulga Tank
other parties.
project area by various companies dates back
to the 1980s
• Of these, more detailed exploration was
completed by BHP Minerals Pty Ltd (1982–
1984), MPI Gold Pty Ltd (1995–1999), North
Limited (1999–2000), King Eagle Resources
Pty Ltd (2004–2012), and Impact (2013–2018)
ASX:WMG
www.westernmines.com.au
11
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and style of • The geology of the project area is dominated
mineralisation.
b y t h e i r re g u l a r s h a p e d M u l g a Ta n k
serpentinised metadunite intrusive body
measuring ~5km x 5km, hosted within
metasediments, mafic to felsic schists and
foliated metagranite of the northwest trending
Archean Minigwal Greenstone Belt
• Previous drilling intersected disseminated and
narrow zones of massive nickel-copper
sulphide mineralisation within the dunite
intrusion
• The intrusion is concealed under variable
thicknesses of cover (reported up to 70 m in
places) with the interpretation of the bedrock
geology based largely on aeromagnetic data
and limited drilling
Drill hole
information
• A summary of all information material to the • A listing of the drill hole information material to
understanding of the exploration results including a
the understanding of the exploration results
tabulation of the following information for all Material
provided in the body of this announcement
drill holes:
• The use of any data is recommended for
indicative purposes only in terms of potential
• easting and northing of the drill hole collar
Ni-Cu-PGE mineralisation and for developing
• elevation or RL (Reduced Level – elevation above
exploration targets
sea level in metres) of the drill hole collar
• dip and azimuth of the hole
• down hole length and interception depth hole
length.
If
the
exclusion of this information is justified on the
•
basis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
• In reporting Exploration Results, weighting averaging • No metal equivalent values have been quoted
techniques, maximum and/or minimum grade
truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths
of high grade results and longer lengths of low grade
results, the procedure used for such aggregation
should be stated and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly important in the • The drillhole was oriented to intersect
reporting of Exploration Results.
perpendicular to the mineralisation or
stratigraphy
If
the
geometry
of
the
mineralisation
with
respect
to
•
the drill hole angle is known, its nature should be • The relationship of the downhole length to the
reported.
true width is not known
• If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
Diagrams
• Appropriate maps and sections (with scales) and • Appropriate maps, photos and tabulations are
tabulations of intercepts should be included for any
presented in the body of the announcement
significant discovery being reported. These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
ASX:WMG
www.westernmines.com.au
12
ASX RELEASE | RC DRILLING EXPANSION AND DRILLING FOR EQUITY
Criteria
JORC Code explanation
Commentary
Balanced
reporting
• Where comprehensive reporting of all Exploration • Not applicable
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration
Results.
Other
substantive
exploration
data
• Other exploration data, if meaningful and material, • Not applicable
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples
Share your feedback
Discover